Handheld fiber and UV lasers

Handheld & Portable Laser Marking Machines for Metal

A handheld laser marking machine is a fiber laser with a 1.5 kg marking head that you hold against the part, so you can mark pipes, tanks, frames, molds and machine housings where they stand. Ours cost $ 2,580 plug-in or $ 3,000 with a 3–4 h battery, with free shipping to the US and Canada. Choose fiber for metals and painted parts, UV for glass, plastics and heat-sensitive parts.

  • 1.5 kg marking head
  • Battery 3–4 h option
  • QR, Data Matrix, serials
  • Excel/TXT import

By the HT Marker team

Handheld laser marking QR codes on a galvanized steel sheet
Handheld laser marking QR codes on galvanized steel.
Buy online

Portable laser marking models

Selection table

Which portable laser fits your job?

Metal parts near an outlet → HS-PFL30M, 30 W fiber, plug-in.

Yards, outdoors, at height, no outlet → HS-PFL30M-B, 30 W fiber with a 3–4 h battery.

Small metal parts and tags, moved between benches → HS-MFL20, 20 W compact fiber unit.

Glass, plastics, coated or heat-sensitive parts → HS-PUV05, 5 W UV, 4 kg.

ModelLaserPowerWhat you carryMarking areaDepthEyewearPrice
HS-PFL30M30 W fiber, 1064 nmPlug-in1.5 kg head, about 9 kg complete100 × 100 mmUp to 0.15 mm1064 nm (included)$ 2,580
HS-PFL30M-B30 W fiber, 1064 nmBattery, 3–4 h1.5 kg head, about 9 kg complete100 × 100 mmUp to 0.2 mm1064 nm (included)$ 3,000
HS-MFL2020 W fiberPlug-in15 kg compact unit110 × 110 mm0.01–0.2 mm1064 nm (included)$ 2,600
HS-PUV055 W UV, 355 nmPlug-in only (needs mains power)4 kg complete80 × 80 mmShallow surface mark; not for deep marks on metal355 nm (included)$ 4,150
Parts of a handheld fiber laser marker: marking head, handle, emergency stop, power switch, touchscreen, USB port, bracket
Handheld fiber laser: head, touchscreen unit, emergency stop and USB port.
Before you buy

Handheld fiber laser or hobby "handheld laser engraver"?

Many small battery engravers sold for $100 to $1,500 are blue diode lasers (about 450 nm). Bare metal reflects most of that light, so they mark wood, leather, paint or anodizing, but not bare steel or aluminum without a marking spray, and a baked spray layer has no depth. To mark bare stainless, steel, aluminum or brass, you need a fiber laser at 1064 nm. Every laser on this page except the UV unit is a 1064 nm fiber laser.

Handheld fiber laser (1064 nm)Hobby blue diode engraver (about 450 nm)
Bare steel and stainlessMarks and engravesOnly with marking spray
Bare aluminumYesLittle or nothing
Painted or anodized metalYes, removes the coatingYes, removes the coating
Wood and leatherNot its main useYes

More on this in How to Engrave Metal: 8 Methods Compared.

Battery, power and software

Battery or plug-in, and how much power?

  • Plug-in HS-PFL30M: runs from mains power. It can also run from a generator that gives the machine a stable 24 V supply.
  • Battery HS-PFL30M-B: 3–4 hours switched on and working per charge (not 3–4 hours of non-stop marking), and about 3 hours to recharge. Marking head 1.5 kg; complete machine about 9 kg.
  • Power: 30 W covers serial numbers, QR and Data Matrix codes, dates and logos. 50 W (HS-PFL50M) and 60 W (HS-PFL60M) versions mark faster and engrave deeper in each pass; ask us for those.
  • Software: you set up and start the mark on the control box touchscreen. Files go in by USB: PLT for logos, Excel or TXT lists for serial numbers.
Fiber laser, UV laser or dot peen marker

Handheld fiber laser marker vs handheld UV laser marker vs dot peen marker

Short answer: a fiber laser marker for metals and painted or coated parts; a UV laser marker for glass and plastics; a dot peen marker for deep marks on bare metal that will be painted or galvanized later. Marking tags at a bench? See metal tag engraving machines.

Handheld fiber laser markerHandheld UV laser markerPortable dot peen marker
Best materialsSteel, stainless, aluminum, brass, painted and anodized metalGlass, plastics, ceramics, coated partsBare steel, cast iron, aluminum
Painted or coated partsYes, removes the coating cleanlyYes, gentle on coatingsChips the paint
Bare metal painted or galvanized laterMark may be coveredNot suitedYes, deep marks read through
DepthUp to about 0.2 mm, more with many passesShallow surface mark; not for deep marks on metal0.05–1.0 mm
Small QR and logosSharpVery fineBasic logos, dot codes
Very hard steelYes; hardness does not limit a laser markUse a fiber laser marker for bare steelNot above HRC 60
SafetyClass IV beam, 1064 nm eyewear, fume extraction355 nm eyewear, fume extractionNo beam; hearing protection on long runs
UV laser marked logo, QR code and barcode on glass
UV laser marks on glass: logo, QR code and barcode.

Not sure which method suits your material?

Send a photo of the part and its finish. Our team tells you whether fiber, UV or dot peen fits.

Contact our team
Readable codes

Getting a QR or Data Matrix code that scans on real parts

  1. Pick the flattest spotOn a pipe or tank, mark along the axis where the surface curves least.
  2. Hold the head square and at focusUse the support bracket so the distance stays the same across the code. A tilted head blurs the cells.
  3. Size the code for the beam and the readerKeep each cell several times wider than the laser spot, and leave a clear quiet zone of at least 4 cells around a QR code (GS1 guidance).
  4. Scan the first partsTest with the phone or scanner your team uses. If the code must pass a grade (ISO/IEC TR 29158, MIL-STD-130), check it with a verifier.
Video: marking QR codes with a handheld laser, step by step
Safety

Using an open-beam handheld laser safely

A handheld fiber laser is a Class IV laser. The FDA says Class IV lasers are an immediate eye and skin hazard from the direct or reflected beam and may present a fire hazard (FDA).

Eyewear by wavelength

Fiber lasers need glasses rated for 1064 nm; one pair ships with each fiber laser marker (HS-PFL30M, HS-PFL30M-B and HS-MFL20). The UV unit needs 355 nm glasses, which ship with it, and it has a fixed-focus shield over the beam. Glasses for one wavelength do not protect against the other.

Laser safety glasses with a green lens and black frame on the work table of a laser marking machine
Wear glasses rated for 1064 nm whenever a fiber laser marker is running.

Control the area

Everyone in the marking area wears eyewear. Keep bystanders out and point the head away from shiny surfaces where you can (OSHA Technical Manual).

Fumes

Coatings and zinc turn into fume when marked. Use extraction, especially on galvanized steel.

Honest advice

When a handheld laser is not the right tool

Marks deeper than about 0.2 mmA laser gets there only with many passes. For deep marks, a pneumatic dot peen marker does it in one cycle.
Bare steel that will be painted, blasted or galvanizedThe coating covers a shallow laser mark. Dot peen first, coat afterwards.
No way to control the areaOpen-beam units need eyewear for everyone nearby. In a busy public area, dot peen is safer.
Hot or freezing sitesHS-PUV05 is rated for 0–30 °C; HS-PFL30M and HS-PFL30M-B for 10–35 °C. Plan indoor use or warm-up time.

What a coat of paint or zinc does to a mark

Laser color mark surface only ✗ Covered Laser engraving up to about 0.2 mm ~ Thin coats only Dot peen mark 0.8 mm ✓ Still reads Paint or zinc, about 0.1 mmSteel (depth to scale)
Depth drawn to scale; width not to scale. Zinc from hot-dip galvanizing is about 0.05–0.1 mm thick (AGA, ASTM A123).
Why HT Marker

What you get with an HT Marker portable laser

With HT MarkerWorth checking with any seller
Price shown, delivered cost known before you buyAre shipping and import duty included?
Photos or a test video of your unit before it ships, on requestWill I see my own machine working before it leaves?
English software: auto serials, dates, Excel or TXT importCan it number parts from my spreadsheet?
1064 nm safety glasses with every handheld fiber unitIs the right eyewear in the box?
Help by manuals, video, email, WhatsApp and remote sessionWho answers when I am stuck on setup?
Bulk, OEM and custom requests handled directlyCan I talk to the people who build it?
FAQ

Portable laser marking questions

How deep can a 30 W handheld fiber laser mark?

Up to about 0.15 mm with the HS-PFL30M and 0.2 mm with the HS-PFL30M-B, depending on the material. More depth means more passes and more time. For marks deeper than about 0.2 mm, use a dot peen marking machine: most electric and battery dot peen markers mark up to 0.5 mm, and the pneumatic HS-PE01-P up to 1.0 mm. Harder metal gives a shallower mark.

Can it mark painted, anodized or galvanized parts?

Yes. The fiber laser removes the top layer and leaves a clear mark. Test on your actual coating first, and use fume extraction on zinc.

Plug-in or battery?

The plug-in HS-PFL30M costs less. Choose the battery HS-PFL30M-B (3–4 hours switched on and working per charge, about 3 hours to recharge) for outdoor work, work at height or big parts away from power.

Is a handheld laser engraver the same as a handheld laser marking machine?

Often the same tool under two names. What matters is the laser type: a 1064 nm fiber laser marks bare metal; a blue diode engraver needs a coating or marking spray on metal. Our handheld fiber lasers mark bare steel, stainless, aluminum and brass.

Can a handheld laser mark curved or large parts?

Yes. Rest the head on its focus support bracket so the distance to the part stays the same, and on pipes and tanks mark along the axis where the surface curves least. Each mark covers up to 100 × 100 mm.

When should I pick the handheld UV laser?

For glass, plastics, ceramics and coated or heat-sensitive parts. HS-PUV05 weighs 4 kg complete, marks an 80 × 80 mm area, has a fixed-focus shield and a built-in touchscreen, and runs its own Linux system with USB file import. It is plug-in only and needs mains power. 355 nm glasses are included.

Can it number parts from a spreadsheet?

Yes. Use automatic serial numbers and dates, or import an Excel or TXT list so each mark takes the next value.

Is the HS-MFL20 handheld?

No. It is a 15 kg compact fiber unit for small metal parts and tags, easy to move between benches or sites.

Ask us

Tell us what you need to mark

Part photo, material and finish, code or text, and how many parts. Bulk, OEM and other countries welcome.